Pulse Valve

The angle between the inlet and outlet ports of the Z-type pulse valve is 90 °, and it can be used in conjunction with the dust collector wall bulkhead connector, distribution box, and special movable joint. As long as the matching selection is reasonable, installation, use, and maintenance are extremely convenient.

The three commonly used ZM pulse valves developed by Xiechang are a type of compression nut connection structure, which is an improved variety based on the Z-type right angle pulse valve.

With the further improvement of the national dust emission concentration standards for the power industry, bag filters with high dust removal efficiency have been widely promoted in the power industry.

Embedded type pulse valve, also known as the blowing pipeline valve of the pulse bag filter cleaning system. Controlled by an electronic control instrument, pulsating "impulse" blowing is carried out to clean the dust. Used in working with XC-PGQ-Y blowpipe connectors, it is reliable to use and easy to install and maintain.

The DCF-T model is a straight-through type pulse valve, with the centerline of the inlet and outlet on the same straight line. The inlet is connected to the air manifold, and the outlet is connected to the blow pipe. The straight-through pulse valve has a large air chamber, a large air blowing volume, convenient installation, and good cleaning effect.

This product has been inspected and passed by the National Quality Supervision and Inspection Center for Explosion proof Electrical Products, and has obtained an Explosion proof Certificate of Conformity and CCC Certificate. Its explosion-proof mark is Ex mb II C T4 Gb/Ex mD 21 T130 ℃, suitable for Class II, T1~T4 groups of combustible gases, vapors, and air mixed to form explosive hazards in Zone 1 or Zone 2 of factories, or environments with combustible dust Type A and Zone 20.